1. Keep the back of the patches and the repaired clothing clean before use;
2. The back of the patches comes with a transparent adhesive film, and the household flat iron is adjusted to the cotton file (120-150 degrees);
3. Place the patches in the position that needs to be modified (do not tear off the adhesive), and press it back and forth a few times, usually for about 15 seconds;
4. In order to prevent burns, it is recommended to put a thin cotton cloth on the cloth (can be an old T-shirt, must be cotton does not fade!! Towels are not available), check if the edges are hot after ironing, on the edge Iron a few more times;
5. It is also necessary to determine the ironing time according to the thickness of the cloth. The thicker cloth is longer for ironing. After ironing the front, press a few times on the back of the clothes;
6. After the temperature is cooled, the processing is completed.
Note:
1. If you are worried that the patch will fall, use a needle thread to sew a few stitches on the edge of the wing.
2. The method of ironing is recommended for cotton and linen fabrics, sweaters/ cords/ mesh/ smooth or rough fabrics are recommended to be sewn with needlework
